OKUMA CAPTAIN L370MW, E100L CNC, 20.8 SW, 21 CC, LIVE TOOLING, SUB, CHIP, '02 (1873)
Stock Number: 1873
Age: 2002
Click to view larger photo
Request a quote on stock# 1873
| Specification | Description |
|---|
| DATE OF MANUFACTURE | 2002 |
| MAXIMUM SWING OVER BED | 20.8" |
| SWING OVER CROSS SLIDE | 13.38" |
| MAX. CUTTING DIAMETER | 13.3" |
| X AXIS TRAVEL | 10.23" |
| Z AXIS TRAVEL | 20.47" |
| C AXIS INCREMENTS | 0.001º |
| SPINDLE NOSE | A2-8 |
| SPINDLE SPEEDS | 38 - 3,800 RPM |
| SPINDLE BORE | 3.15" |
| MAX BAR CAPACITY | 2.75" |
| MAIN SPINDLE MOTOR | 30 HP |
| TURRET CAPACITY | 12 POSITIONS |
| SUB SPINDLE MOTOR | 10 HP |
| SUB SPINDLE SPEEDS | 4500 RPM |
| LIVE TOOLING MOTOR | 7.5 HP |
| LIVE TOOL SPEED | 4,500 RPM |
| APPROX. DIMENSION | 107" x 72" x 71" |
| APPROX. WEIGHT | 11,000 LBS |
Equipped With:
OKUMA OSP-E 100-L CONTROL W/12" CRT SCREEN
RS-232C PORT INTERFACE FOR DNC OPERATION
10" & 6" 3-JAW CHUCKS (ON MAIN & SUB SPINDLES)
TOUCH SETTER, SERVO TURRET, ONE TOUCH IGF
FULL CONTOURING C-AXIS LIVE MILLING CAPABILITIES
STANDARD COOLANT SYSTEM WITH TANK & PUMP
RIGHT SIDE LIFT-UP SIDE DISCHARGE CONVEYOR
FULLY ENCLOSED GUARDING, ALL AVAILABLE MANUALS
6 MISCELLANEOUS LIVE TOOL HOLDERS (X & Z AXES)
ALL AVAILABLE TURNING TOOL BLOCK HOLDERS
Meridian Machinery, Inc.
10424 38th Street
Kenosha, WI 53144
262-854-5054
262-854-5055
sales@meridianmachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
